Cactus Tactical

Magpul MOE Stock, Black - Mil Spec

The Magpul Original Equipment (MOE) is a line of high quality, inexpensive gun accessories that are simple, durable upgrades to standard Mil-Spec components.

The MOE carbine stock combines great quality with an economical price, and is a drop-in upgrade for a standard M4-style collapsible stock. The stock makes use of a strong, A-frame design, has a streamlined appearance and protected operating lever. Reinforced polymer construction.

For use with Mil-Spec diameter buffer tubes only.

Yankee Hill Machine Swivel Stud

This Yankee Hill Machine Swivel Stud attaches to a variety of forearms and allows the use of a 1-1/4 inch QD Sling Swivel.

Some forearms have a pre existing threaded hole in which this swivel stud will fit, other forearms will require modification for use.

Harris #5 Adapter for AR-15

The Harris #5 adapterfits AR-15's with the standard round handguard and can be used without any alterations.
This adapter is also the one to use for custom AR-15 installations. You can drill a hole in the wood or plastic fore-end of any rifle (with sufficient strength) and put the backing plate on the inside, the stud on the outside, allowing you to use any Harris bipod and or sling combination.

Swivel included.

Magpul MOE Grip, Black

The Magpul Original Equipment (MOE) AR-15 pistol grip improves comfort for better weapon handling and control.

The new Magpul Original Equipment (MOE) pistol grip gives the shooter a more comfortable, secure grasp than the standard, A2-style grip for better trigger control and recoil management with less fatigue.

It improves weapon handling during precisely aimed shots as well as sustained semi- or full-auto fire.
Rigid, fully supported one-piece construction from reinforced, high-impact polymer, with crackle texture on the sides and deep horizontal grooves on frontstrap and backstrap to keep your hand firmly in place, even when wet.
Curved beavertail fills the grip-to-receiver junction to help you maintain a comfortable hold and protect the web of you hand during sustained firing.
Removable grip cap provides access to a roomy internal storage compartment for spare batteries, cleaning supplies, small bottle of oil, or even a spare bolt.

Compatible with Magpul MIAD Grip Cores and Enhanced Aluminum Triggerguard, available separately. Drop-in installation in minutes with included mounting hardware and instructions.

Yankee Hill Machine EoTech Riser

The Yankee HIll Machine EoTech Riser has been newly redesigned for increased accuracy and improved clamping power! This mount elevates your EOTech .300 inches allowing you to clearly look through the center of the Eotech and still use your iron sights in the lower third of the Eotech window.

Made from aircraft quality aluminum and hardcoated to military specifications.

Elcan SpecterDR 1 - 4 Optical Sight

The SpecterDR 1 - 4x Optical Sight is recognized as the world's most advanced combat optical rifle sight. Effectively two rifle sights in one, the SpecterDR can be switched instantly from a 4x long-range sight to a 1x wide field-of-view CQB sight. Unlike sights with zoom mechanisms, both the eye relief and the optical design remain optimal.

The battery-powered LED illumination system has two ranges: one that illuminated the entire crosshair for long range low light use, and another that illuminates just a red dot in the center for CQB applications. Zeroing functions are incorporated in the integral mount and the sight attaches to Mil-Std-1913 'Picatinny' receivers with ARMS Levers. The reticle is ballistically compensated for 5.56 NATO. Comes with one-year warranty.

Click for the Specification sheet for the Elcan Spectre DR Scope

Specifications:

Weight (g): 580

Size (mm): 153 x 74 x 78

Eye Relief (mm): 70

Field of View @ 100yds (ft): 146.3 - 34.2

Exit Pupil (mm): 8

Features:

Fixed Focus Range (m): 20 to infinity

Battery Type: DL 1/3N (3v Lithium)

Battery Life: 600 hours minimum, 3000 hours average

Ballistic Calibration: 100m - 600m for 5.56 carbine, 700 - 1000m for 5.56 LMG

Adjustment Resolution: 0.5 MOA

Adjustment Range: 120 MOA

Base Requirement: Mil-Std-1913 'Picatinny Rail'

Attachment: Mil-Std-1913 'Picatinny Rail'

Galati Shotgun Shell Belt

The Galati Shotgun Shell Belt has a quick detachable buckle and quality elastic keepers to securely hold your shotgun shells. The shells will not shake loose while walking or shooting.

The small shotgun belt holds 25 rounds and fits waists from 36 - 41 inches.
The medium shotgun belt holds 35 rounds and fits waits from 45 - 52 inches.

Valdada 4 x 24 M2 Rifle Scope, .308 Cam

The Valdada M Series of scopes are true BDC style optics. The M1 scope has the elevation knob calibrated for the .308 168gr BTHP @ 2700 fps trajectory, from 100-1000m. Lightweight and compact, this scope is regarded as one of the most rugged tactical scopes ever made. Tested on battlefields worldwide for over 35 years, its optical performance, precision mechanics and flawless reliability were proven many times over.

Product Description:

The 4x24 M1 Tactical scope is the Valdada sporting version of the proven military PSO design, for use on a variety of rifles, and it is available with a cam for .308 Win. Its 30mm tube readily accepts any standard 30mm rings, Piccatiny, Stanag or Weaver-style for attachment to virtually any common mount. The reticle features a battery-powered illumination system with 7 intensity settings for use under a variety of low-light situations. Uses a common 3v CR2032 cell which is supplied. The scope features the European fast focus ocular design, with 3 inch protective rubber eyecup (removable to be replaced by flip-up caps if desired).

Its features include:

Glass rangefinding reticule
6061 T6 Dural alloy housing, "O" ring sealed and nitrogen filled
30mm tube diameter
Finger-adjustable knobs
Bullet drop compensated cam from 100 to 1000 meters for the .308 168gr BTHP bullet @ 2700 fps trajectory
Waterproof - Fogproof - Shockproof
Superior optical glass by Schott Glasswerk, Germany
Battery powered illumination system with 7 intensity settings
MC-7 Fully multicoating technology with anti-reflex layers, eliminating glare and maximizing light transmission
Reticle Choices: Dot Ranging or CQB Tactical Reticle

Technical Data:

Magnification - 4x
Objective diameter - 24mm
Field of view at 100 yards - 32 feet
Exit pupil diameter - 6mm
Eye relief - 3.15 inches
Tube Diameter - 30 mm
Length with rubber eyecup - 10 inches
Weight 16 ounces
Elevation adjustment on BDC cam for .308, 168gr trajectory from 100m - 1,000m
Intermediate 50m clicks from 300m-1,000m

Blade Tech AR-15 Magazine Pouch - Molle Lok

These new Blade Tech pouches are injection molded. They are made with adjustable tension screws for retention and security so the cumbersome locking flaps are not needed. These pouches are ambidextrous, will work with bullets forward or bullets to the rear. The tension screws will be forward for Left handed users.

Currently available with Molle Lok attachments for quick attachment to a vest, thigh rig or belt.

Blade Tech Inside the Pants Holsters - Glock 9mm / 40SW

This Blade Tech designed IWB concealment holster allows the firearm to remain tight against the body for extra concealment. This holster features 2 loops with pull dot snaps (PDS) that allow the holster to be carried on belts up to 1-3/4" wide. It Also features an adjustable cant and a tension screw for retention adjustment.

This holster will fit the Glock 17 / 19 / 22 / 23 / 24 / 26 / 27 / 31 / 32 / 33 / 34 / 35.

IDPA approved

Features:

Inside the waistband holster made from .093 inch kydex
Handgun is held tight to the body and holster has a protective panel so that a shirt won't interfere with the handgun's safety, etc.
Adjustable tension screws for retention
Adjustable cant
Two loops with pull dot snaps (PDS) allow holster to be carried on belts up to 1 3/4 inches wide.

Nordic Components Benelli M4 Magazine Extensions

Nordic Components - extended magazine tubes for Benelli M4 shotguns

These are the finest machined shotshell tube extensions currently available. Each tube has a unique swirl style barrel nut (image on left) adding a distinctive touch while also providing a quick and sure grip.

Currently available in +2 configuration for the Benelli M4 shotgun. Shell capacity is defined by Nordic as the shell increase above the standard capacity provided by the fixed magazine tube (tube inside the forearm). If your shotgun currently has a short tube extension that extends past the fixed magazine tube, the round capacity of that extension would be lost as it is removed and replaced.

Overall length of the tube extensions : +2 - 6 inches.

An extended spring is included with the magazine extension tube.

Followers, clamp, clamp rail and speed bolt handle in the image below are for display purposes only and are not included with the magazine extension. These items can be purchased separately.

Nordic Components Browning Gold Magazine Extensions

Nordic Components - extended magazine tubes for Browning Gold shotguns

These are the finest machined shotshell tube extensions currently available. Each tube has a unique swirl style barrel nut (image on left) adding a distinctive touch while also providing a quick and sure grip.

Currently available in +3, +4 and +5 configurations for the Browning Gold shotguns. Shell capacity is defined by Nordic as the shell increase above the standard capacity provided by the fixed magazine tube (tube inside the forearm). If your shotgun currently has a short tube extension that extends past the fixed magazine tube, the round capacity of that extension would be lost as it is removed and replaced. Magazine tube length is the length of the tube and nut.

Overall length of the tube extensions (including the nut):
+3 - 8 1/4 inches
+4 - 10 inches
+5 - 11 5/8 inches

Using the tube overall length provided above, please determine the complete installed length of your shotguns fixed tube and the tube extension. Once this is done, it should be apparent that some tubes will extend past the end of your barrel when installed. That is a perfectly viable option for shotgun use, it is your personal choice as to whether tube extends past the barrel. Please decide before you buy as to whether it is acceptable to you for a tube to extend past the barrel.

An extended spring is included with the magazine extension tube.

Followers, clamp, clamp rail and speed bolt handle in the image below are for display purposes only and are not included with the magazine extension. These items can be purchased separately.

Nordic Components Winchester SX2 / SX3 Magazine Extensions

Nordic Components - extended magazine tubes for Winchester SX2 and SX3 shotguns

These are the finest machined shotshell tube extensions currently available. Each tube has a unique swirl style barrel nut (image on left) adding a distinctive touch while also providing a quick and sure grip.

Currently available in +3, +4 and +5 configurations for the Winchester SX2 and SX3 shotguns. Shell capacity is defined by Nordic as the shell increase above the standard capacity provided by the fixed magazine tube (tube inside the forearm). If your shotgun currently has a short tube extension that extends past the fixed magazine tube, the round capacity of that extension would be lost as it is removed and replaced. Magazine tube length is the length of the tube and nut.

Overall length of the tube extensions (including the nut):
+3 - 8 1/4 inches
+4 - 10 inches
+5 - 11 5/8 inches

Using the tube overall length provided above, please determine the complete installed length of your shotguns fixed tube and the tube extension. Once this is done, it should be apparent that some tubes will extend past the end of your barrel when installed. That is a perfectly viable option for shotgun use, it is your personal choice as to whether tube extends past the barrel. Please decide before you buy as to whether it is acceptable to you for a tube to extend past the barrel.

An extended spring is included with the magazine extension tube.

Followers, clamp, clamp rail and speed bolt handle in the image below are for display purposes only and are not included with the magazine extension. These items can be purchased separately.

Magpul 30 rd Maglevel Polymer Magazine (PMAG), Olive Drab

The Polymer Magazine (PMAG) is a lightweight 5.56 NATO, M-16 compatible magazine. The PMAG features a pop-off storage/dust cover that alleviates pressure from the magazine feed lips, allowing for storage of loaded magazines without risk of feed lip creep that often causes malfunction in standard aluminum magazines. PMAG utilizes a resilient stainless steel spring for corrosion resistance.

The MagLevel PMAG features a window with a round count indicator.

Features:

Anti-tilt follower for increased reliability
Storage/dust cover
Stainless steel spring for corrosion resistance
Textured gripping surface.

If you are unclear about the legality of buying high capacity magazines in your city or state, please click here for the current state and local restrictions. It is the buyers responsiblity to be aware and accountable for any purchase which could violate a local or state law.

Hi-Capacity Magazine Policy:
No magazines with a capacity over 10 rounds to CA, HI, NY, Toledo, OH or MA.
No magazines with a capacity over 12-rounds to Chicago Illinois.
No magazines with a capacity over 15 rd. to NJ.
No magazines with a capacity over 20 rd. to MD.
Be sure to check local and state regulations before ordering.

Springfield XD 45 ACP, holster and magazine pouch package

You don't just get the gun, you get the gear too. Gun lock, two magazines and the Springfield firearm that you choose all nicely packed into a hard plastic gun case. The Springfield XD pistols are double action only with a 13 round mag capacity plus one in the chamber. Comes complete with fixed dovetail three dot sights and checkered polymer grips.

The new Springfield Armory XD .45 ACP Package. This package comes with 2 - 13 round magazines, polymer holster, speed loader and polymer double mag pouch.

From the moment you pick it up you won't believe it's a 45 ACP, much less one that holds 14 rounds. Of course a polymer pistol of any caliber that feels this good in your hand could only be one thing: an XD.

This time the Springfield engineers have outdone themselves, defying the laws of physics, adding material where needed, shaving it away where it's not ... cramming 14 rounds of 45 ACP punch into a polymer frame that is not perceptively larger than the one we use for the 9mm and 40 cal. XDs. Finally, it's here ... a 45 ACP XD that is true to the spirit of what the XD is all about ... an ergonomic wonder that is not just a gun that shoots, but a gun designed for YOU to shoot.

This pistol cannot be shipped to CA, MA, NY & DC.

Caliber: 45 ACP

Magazines: 2 13 round stainless steel

Sights: Dovetail front and rear, 3 dot

Frame: black polymer

Length: 7.3 inches

Width: empty - 30 ounces

Part Number: XD9611HCSP06

Speedfeed III Mossberg 500 / 590 Tactical Stock Forearm Set

After more than two years of research, development, and prototyping, SPEEDFEED has produced the best tactical shotgun stock / forearm ever! The pistol grip design now allows true one-hand control. Combined with the in stock magazine, the SPEEDFEED III Tactical Stock is the most versatile stock on the market today. Tthe SPEEDFEED I stock has two magazine tubes (storing a total of four rounds) molded into the stock. Each magazine tube (holding two shells) exits just behind the pistol grip, one on each side of the stock. A steel spring in each tube holds the rounds in the magazine until they're needed and then with a flick of the finger, shells are instantly available for loading. The set includes forend and recoil pad.

Speedfeed Part # 0255 - fits 12 gauge Mossberg 500 / 590 shotguns.

AR-15 Upper Receiver Parts Kit

The DPMS Upper Receiver Parts Kit contains the Forward Assist Assembly, Ejection Cover Assembly and the A2 Rear Sight Assembly.

Charging Handle is not included.

DPMS Carbon Fiber Forearm, Carbine Length

The DPMS Carbon Fiber Free Float Tube is for a carbine length M4 / CAR-15 hanguard system.

This handguard is made of the same material as the Dodge Viper hood. It is very light weight, durable and helps dissipate heat better than a conventional free float tube.

DPMS Carbon Fiber Forearm, Standard Length

The DPMS Carbon Fiber Free Float Tube is for a standard length AR-15 hanguard system.

This handguard is made of the same material as the Dodge Viper hood. It is very light weight, durable and helps dissipate heat better than a conventional free float tube.

DPMS Assembled Lower Receiver with M4 Collapsible Stock

DPMS Panther Arms Forged Lower Receiver Assembly

The DPMS Lower Receiver is forged from T6 Aircraft Aluminum Alloy and has a hardcoat anodized finish. Assembled AR-15 lower includes a 6 position collapsible stock and an A2 pistol grip.

Description

Aircraft Aluminum Alloy Tempered to T6 Condition
Hardcoat Anodized per Mil-A-8625
Teflon Coated Black.

Due to Federal firearms regulations, a Form 4473 or transfer to a receiving FFL is required for the purchase of this receiver. If you are unsure of the procedure, please click here for more information.

M4 Collapsible Butt Stock with Extension Tube

Use this enhanced design tele stock to easily convert Your AR-15 or fixed stock CAR-15 Rifle To true M4 or CAR-15 dimensions. This unbreakable, collapsible butt stock instantly makes the AR-15 / M16 lighter, shorter, compact and easier to carry. The sling swivel can be offset to either left or right.

Latch hardware and sling swivel are included. Mounting hardware sold separately. Available in black only.

This kit incluldes a 6 position commerical dimension extension tube, castle nut and rreceiver end plate.

S&W M&P Knife, Assisted Opener, Black

Smith & Wesson M.A.G.I.C. Knife - partially serrated edge tanto blade with a black Teflon coating. A very well built knife that powerfully snaps open! Opens easily with the thumbstud or black button on top. The aluminum handles have a nice feel in hand.

Features:

Brand new in box - manufacturer direct
Closed length: 4.25"
Blade length: 2.9"
PARTIALLY SERRATED edge stainless TANTO blade with a black Teflon coating
Ambidextrous thumb studs
Assisted opening blade
T6061 aircraft aluminum handles.

S&W SORT Knife, Assisted Opener, Black

Smith and Wesson SORT Knife, Black Aluminum Handle, Black Blade, Combo Edge

Smith & Wesson makes very good knives at very good prices. The S.O.R.T series--Special Operations Rescue Team--features high quality materials, great craftsmanship, and sophisticated designs. This model in particular has excellent fit and finish, and a super fast assisted opening mechanism. The safety protects you from accidentally opening the knife in your pocket.

Features:

Overall Length (inches): 6.13
Blade Length (inches): 2.75
Blade Material: 4034 Steel, Black
Blade Detail: Combo Edge
Handle Material: Aluminum, Black
Lock Style: Liner Lock
Carry System: Pocket Clip
Special Features: Assisted Opener

Streamlight Super Tact - LED Flashlight

The Streamlight Super Tac LED flashlight is an extremely high performance CR123A Lithium battery-powered flashlight. This light features the latest in LED technology for extreme brightness and long range illumination combined with a push button momentary or constant on tail cap switch for one handed operation.

Streamlight introduces a whole new kind of LED. With a brighter, more powerful, blinding light than any LED that has came before. The new Streamlight-engineered reflector with C4 Photonic Crystal technology almost triples the brightness and creates an intense beam that pierces the darkness. So you get the long-run times and indestructibility of an LED with a new level of brightness that leaves other LEDs in the dark.

Specifications:

Bulb:C4 LED 135 Lumens / 30,000 peak beam candlepower
Runtime: up to 3.5 hours
Lens: Unbreakable polycarbonate with scratch-resistant coating. O-ring sealed
Length: 6.62 inches
Weight: 7.1 oz
Length: 6.62 inches
Body Diameter: 0.90 inches
Major Diameter: 2.20 inches
Reflector: Deep-dish parabolic reflector produces a long range targeting beam with optimum peripheral illumination to aid in navigation. Optimized electronics provide regulated intensity.
Limited lifetime warranty
Two 3 Volt CR123A Batteries (included)
Holster included.

Features: IPX7 Rated design. All openings o-ring sealed to resist moisture. Serialized for positive identification. LED Solid State circuitry provides regulated light output throughout battery life. Removable pocket clip. Fits Streamlight 69100 Rail Mount. Operates with remote switches.

Mossberg 500 Tactical Shotgun

Click here for information when ordering a firearm.

Factory New & unfired Mossberg 500 TACTICAL Persuader/Cruiser 6-SHOT pump-action shotgun in 12 ga.

Manufacturer: Mossberg

Model #: Model 500 Tactical Cruiser - 50420

Type: Shotgun

Finish: Matte Black

Stock Drop :1 1/2 inches - Comb and 2 1/8 inches - Heel

Sights: Bead

Barrel Length: 18 1/2 inches

Overall Length: 39 1/2 inches

Weight: 6 3/4 lbs

Chokes: Cylinder Bore

Chamber: 3 inch

Caliber: 12 Gauge

Capacity: (5 + 1 2 3/4 inch shells) (4 + 1 3 inch shells)

Action: Pump Action.

Glock Field Knife, Tan with Saw Blade

Glock's knives are made of a special hardened steel with polymer handles and black anti-corrosive coated blades for maximum durability and ruggedness. Knives come with matching sheaths made of high-impact resistant polymer materials and feature a loop catch, which allows for quick drawing with only one hand. They fit belts up to 2.4 inches (60mm) in width. These knives are used by special forces around the world and are perfectly balanced for throwing. The handle is made of a high-strength polymer (of course) and the backbone of the blade features a wicked saw-style blade that looks like it will cut through just about anything.

Glock Field Knife, Tan

Command Arms Collapsible Butt Stock

NTOA (National Tactical Officers Association) tested and recommended.

Six position AR-15 / M4 Collapsible Butt Stock with rubber non-slip recoil pad and skeletonized design feature a Picatinny rail and storage compartment for 4 CR123 batteries (not included) or other small items. Ambidextrous design is easily achieved by switching the battery compartment lid and Picatinny rail. Two ultrasonically welded metal inserts allow for the addition of optional quick release sling adaptors (PBSS).

Batteries are not included.

Tac Star Side Saddle, Remington - 4 Shell

The patented TacStar Hunter SideSaddle mounts 4 extra rounds on your shotgun in a convenient and accessible location for fast reloading. The Hytrel polymer shell carrier is attached to an aluminum mounting plate that installs directly on the shotgun receiver. All mounting screws are included, no gunsmithing required. Installation is easy, and in most cases requires no alterations to the shotgun. Note: some field grade shotguns may require a modification to the shotguns forend. Shotguns using the TacStar pistol grip forend do not require modification.

This side saddle will fit the Remington 870, 1100 and 1187.

Snap Hook Style Front Sling Adapter

Each Midwest Industries Snap Hook Style Front Sling Adpater is precision CNC-machined for proper fit and fast easy sling hookup. Steel cross-bolt(s) locks the clamping block tight to eliminate slippage. Adapts virtually any sling to any AR-15 configuration. The Snap Hook Stylle Frotn Sling Adapter has a fixed, round, 5/16 inch (7.8mm) ID loop for clip-on, H&K-style or similar quick-release slings

Features:

Constructed of 6061 aluminum, hard coat anodized for a lifetime of service
HK type loop.

Bushmaster Target Rifle, A3 Style

Click here for information when ordering a firearm.

The Bushmaster A3 Target Rifle has become the standard for many military forces and Law Enforcement agencies throughout the world. The rifles light weight, accuracy, high capacity, and ease of maintenance all contribute to its wide global acceptance. Features of this durable semi-automatic rifle include hard chrome lining in both bore and chamber. This chrome lining, was developed because powder residue and copper fouling do not adhere as strongly to chrome as they do to plain barrel steel. Additionally, chromes lubricity increases muzzle velocity, and eases chambering and extraction. These factors can double the effective barrel life if regular maintenance procedures are observed. The barrel incorporates a birdcage style flash suppressor with closed bottom which compensates for muzzle climb and reduces dust signature when firing from the prone position. The barrel, and all critical steel components of the rifle, are manganese phosphate coated for protection against corrosion and rust.

With the A3 Target Rifle, the Carry Handle is removable to allow easy mounting of a wide variety of scopes, red dot or holographic sights, or night vision equipment. The rear sight used in the Removable Carry Handle is range adjustable from 300 to 600 meters (1/2 MOA for both elevation and windage). Iron sight zero is repeatable when the handle is reattached by means of its knurled knobs.

The Upper and Lower Receivers are precision machined from 7075T6 aircraft quality aluminum forgings for maximum strength. The Upper Receiver includes a forward assist device and an integral cartridge case deflector. The Lower Receiver controls include bolt catch assembly; magazine release button, and safety selector with indicator markings on both left and right sides. The ribbed front handguards - molded of polymer thermoset composite - offer increased control and heat dissipation. The pistol grip and buttstock are also molded of thermoset composite, and the buttstock features a storage compartment for small parts or cleaning gear. The Bushmaster A3 Target Rifle is shipped complete with 30 round magazine, safety and operational manual, and carrying sling in a lockable hard case. The Bushmaster A3 Target Rifle also includes a Removable Carry Handle.

Features:
Finish: Black matte
Receiver: Forward Assist Brass Deflector
Sights: A2 Sights on removeable carry handle
Barrel Length: 20 inches [50.8 cm]
Overall Length: 39.5 inches [100.3 cm]
Weight: 8.78 lbs. [3.98 kg]
Muzzlebreak: Flash Suppressor
Packaging: Black Hard Case
Additional Features: 1 inch wide Black Sling, Black Thermaplastic Pistol Grip, Bayonet Lug

Wiley X PT-1 Sunglasses, smoke, clear and light rustlenses, zipper top case included

The Wiley-X PT-1 sunglasses offer virtually unbreakable Triloid nylon frames that will keep you focused on your task. Designed to cut wind and debris, the circular frame design provides ultimate peripheral vision and reduces backlit glare. This is a very popular model among the troops protecting our great nation. Meets ANSI Z87.1-2003 high velocity safety as well as the military's stringent Vo Ballistic Standard, MIL-PRF-31013.

The Wiley X PT-1 offers a virtually unbreakable Triloid nylon frame that allows the user to easily change specific lens tints for various light conditions. The Circular frame design surrounds the frontal lobe, providing incredible peripheral vision and backlit glare reduction. The custom nose pad is constructed from a soft, clear, neoprene rubber compound that can be adjusted to accommodate any size nose bridge and set the level of the frame on the face. The ear tips are made from a rubber compound, designed to grip better as your body temperature rises.

Includes: smoke, clear and light rust lenses and soft side case.

Wiley X AirBorne Sunglasses, gloss black frames with smoke lenses

Wiley-X Airborne Sunglasses are great looking sunglasses with superior protection from debris and wind from every angle. The designer styled Wiley X Airborne literally seal the eyes from outside elements during cycling, hiking, fishing, sailing or chilling.

The Wiley-X Logo stands for quality and Wiley-X Airborne Sun Glasses are designed for a perfect fit and long-lasting comfort. The Wiley-X Climate Control Series features a removable, durable facial cavity seal that locks onto lightweight ANSI certified frames. Excellent for sufferers of dry eye syndrome or anyone who's had LASIK or laser surgery. Wiley-X lenses block 100% of the sun's harmful ultraviolet rays (up to 400 nanometers) and far exceed ANSI Z87.1 safety and ANSI Z80.3 optical standards.

Cactus Tactical is an authorized distributor of genuine Wiley-X Sunglasses, Wiley X Rx Prescription Eyewear and Wiley X Goggles. Our WileyX Airborne Sunglasses are brand new and come with the full Wiley-X Warranty. We have the best deal on Wiley X Goggles & Sunglasses for U.S. Military (NSN) and Wiley X Nascar Sunglasses and Goggles.

Go ahead. Get out. Challenge the world outdoors. Whatever your pursuit, whether you're working hard, playing even harder, or just hanging out, Wiley X Airborne Glasses keep your eyes protected without sacrificing good looks!

Wiley X Airborne Sun Glasses Features:

Facial Cavity Seal
Lightweight Frame
100% UV Protection
Exceeds ANSI Z87.1 Safety Standards
Exceeds ANSI Z80.3 Optical Standards
Recommended to dry eye syndrome sufferers
Recommended after LASIK or laser surgery.

Package Contents:

New Genuine Wiley X Airborne Sunglasses
New Genuine Wiley X Airborne Sunglasses
Original Wiley X sunglass case.

Blackhawk Universal Single Point Sling Adapter

The Blackhawk Universal Sling Adapter has a totally streamlined design, eliminating the ears that stick out of all the other connectors available. The attachment point is perfectly centered, and is designed to make your rifle hang properly for an immediate re-grip when needed.

Completely ambidextrous, no more left or right versions. Interference with your seletor switch / safety operation is completely gone with this new design.

Made of steel right here in the USA. Accepts MASH hooks (preferred), Z/M style clasps, and HK hooks.

Features:

Accepts all styles of sling hooks
Ring is designed to hold weapon flat against body - your rifle will hang naturally at the ready
its all AR / M4 collapsible stocks, including shotgun conversion kits using AR style receiver plates
Solid, all steel construction
100% Made in USA.

DPMS AR-15 Sportical

DPMS Panther Arms 5.56 NATO Sportical

Barrel:

16 inch Lite Contour w/A2 flash hider (birdcage)

4140 chrome-moly steel

6 grooves, right-hand 1x9 twist, button rifled

Chamber:

5.56x45mm

Method of Operation:

Gas operated rotating bolt

Bolt & Carrier:

8620 steel bolt carrier, heat treated and plated per Mil Spec

Phosphated steel bolt, heat treated and plated per Mil Spec

Sights:

None (mounting optics only)

Weight:

Empty - 6.3 lbs.

Length:

Extended: 36 3/8 inches

Collapsed: 32 1/2 inches

Stock:

DPMS Pardus Carbine Stock

Handguards:

GlacierGuards

Oval Carbine Length

Aluminum Delta Ring

Each Rifle comes with 2 - 30 round magazines, 1 Nylon Web Sling, and 1 Cleaning Kit.

The optic displayed in the image is for illustrative purposes only and not included with the DPMS Sportical.

Due to Federal firearms regulations, a Form 4473 or transfer to a receiving FFL is required for the purchase of this receiver. If you are unsure of the procedure, please click here for more information.

DPMS AR-15 Assembled Lower Receiver

DPMS Panther Arms Forged Lower Receiver Assembly

The DPMS Lower Receiver is forged from T6 Aircraft Aluminum Alloy and has a hardcoat anodized finish. Assembled AR-15 lower includes a mil-spec A2 buttstock assembly and an A2 pistol grip.

Description

Aircraft Aluminum Alloy Tempered to T6 Condition
Hardcoat Anodized per Mil-A-8625
Teflon Coated Black.

Command Arms Collapsible Butt Stock, with mag tube

NTOA (National Tactical Officers Association) tested and recommended.

Six position AR-15 / M4 Collapsible Butt Stock with rubber non-slip recoil pad and skeletonized design feature a Picatinny rail and storage compartment for CR123 batteries (4 total) or other small items. Ambidextrous design is easily achieved by switching the battery compartment lid and Picatinny rail. Two ultrasonically welded metal inserts allow for the addition of optional quick release sling adaptors (PBSS).

Includes buffer tube, buffer spring, buffer assembly, castle nut, and collar.

Ruger 10/22 Rifle

Click here for information when ordering a firearm.

Ruger 10/22 rifles are ideally suited for informal target shooting, plinking, small game hunting, and action-shooting events. The benefits of the Ruger 10/22 are many. The standard 10/22 Carbine, virtually unchanged since introduced in 1964, is the most popular .22 rifle of the last 40 years.

Features:

Caliber: .22 LR
Barrel Length: 18 1/2 inches
Stock: Hardwood
Rear Sight: Adjustable
Suggested Retail Price: $ 261.00.

Valdada High Profile Extended Riser

This is the most versatile riser block we make. .500 inch high and including an extended rail allows a wide range of options. This mount also features a see through hole and 4 Stanag mounting holes for the ultimate in mount option.

Laser engraved V-Tac series.

Product Data:

Length 7 7/8 inches
Weight 6.6 ounces.

Valdada Low Profile Extended Riser

This .250 inch riser block extends out over the handguard offering more mounting options for longer optics.

Laser engraved V-Tac series.

Product Data:

Length 7 9/16 inches
Weight 3.2 ounces.

Valdada One Piece Rail Mount

This aluminum base and Stanag ring set is made to NATO specs and is a superb platform to mount any scope. It mounts to any existing picatinny 1913 rail, and you can buy additional ringsets to change scope tube diameters while still utilizing one base.

Currently available with 30 and 35 MM ring sets.

Product Data:

Length 5 inches
Weight 3.2 ounces.

Galati Six Pack Pistol Magazine Pouch

The Six Pack Magazine Pouch from Galati International holds six 45 Auto magazines, Browning Hi-Power magazines or four double stacked magazines. It has double belt loops for attachment to a belt. Separate Velcro closures are on each of the four pockets.

Constructed from PVC Tactical Nylon for superior quality.
Overall Length: 12 1/4 inches x 6 1/4 inches.

100% Guaranteed with a 2 Year Warranty through Galati International.

STRIKE Sniper Gun Rest

STRIKE SNIPER REST

Features:

Provides stability and accuracy as a long-gun shooting platform
Attaches to webbing on packs using two #9 speed clips
Turns any pack into a sniper pack.

Dimensions: 7.5 inches square x 2.5 inches high.

BlackHawk CQC Standard Holster, Matte Finish, H&K USP Compact, RH

The amazing new Blackhawk CQC Holster gives you the most advanced material available for a holster, with a tension-adjustable passive retention system that allows you to select the amount of retention on your gun, from a little to a lot. Not just another pair of rubber tubes and screws, this system uses a screw-adjustable detent that grabs the trigger guard of your pistol.

The holster also features a speed cut in the front to help you draw the weapon quickly and a slight flare to the opening to help you re-holster easily. The fully covered trigger guard provides added safety and the holster is designed to allow a full grip before drawing the weapon.

Instead of deciding whether to buy your holster as a belt loop or paddle model, BlackHawk CQC provides you with both platforms for your holster. They give you the choice of how you want to wear it, since your needs can change from day to day.

All BlackHawk CQC Holsters include both Belt Loop and Paddle Platforms. This is an example of how BlackHawk CQC holsters give you choices where others give you limits.

Features:

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Matte Finish, Springfield XD, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Matte Finish, Sig Sauer P220 / P226, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Matte Finish, Sig Sauer P228 / P229, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Matte Finish, Beretta 92 / 96, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Matte Finish, Glock 19 / 23 / 32, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Matte Finish, Glock 26 / 27 / 33, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Matte Finish, Glock 17 / 22 / 31, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Matte Finish, 1911, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Carbon Fiber Finish, Sig Sauer P228 / P229, RH

The amazing new Blackhawk CQC Carbon Fiber Composite holster gives you the most advanced material available for a holster, with a tension-adjustable passive retention system that allows you to select the amount of retention on your gun, from a little to a lot. Not just another pair of rubber tubes and screws, this system uses a screw-adjustable detent that grabs the trigger guard of your pistol.

The holster also features a speed cut in the front to help you draw the weapon quickly and a slight flare to the opening to help you re-holster easily. The fully covered trigger guard provides added safety and the holster is designed to allow a full grip before drawing the weapon.

The textured Carbon Fiber Composite is enhanced by a Carbon-Fiber finish appliqué that gives this holster a cutting edge appearance like no other. The design of the holster aids in concealment with its cut-down body and tapered trailing edge.
Instead of deciding whether to buy your holster as a belt loop or paddle model, BlackHawk CQC provides you with both platforms for your holster. They give you the choice of how you want to wear it, since your needs can change from day to day.

All BlackHawk CQC Carbon Fiber Holsters include both Belt Loop and Paddle Platforms. This is an example of how BlackHawk CQC holsters give you choices where others give you limits.

Features:

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Carbon Fiber Finish, Sig Sauer P220 / P226, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Carbon Fiber Finish, HK USP Compact, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Carbon Fiber Finish, Springfield XD, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Carbon Fiber Finish, 1911, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Carbon Fiber Finish, Glock 26 / 27 / 33, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Carbon Fiber Finish, Glock 19 / 23 / 32, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Carbon Fiber Finish, Glock 17 / 22 / 31, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

BlackHawk CQC Standard Holster, Carbon Fiber Finish, Beretta 92 / 96, RH

A cut down body & tapered trailing edge aid in concealment
Tension adjustable detent allows you to select level of retention
Speed cut allows for fast draw and easy reholstering

Hogue Over Moulded Shotgun Stock, Remington 870

Hogue Shotgun Stocks are molded from a super tough fiberglass reinforced polymer, assuring stability and accuracy. These superior stocks are durable, weatherproof and non-slip. Hogue Shotgun stocks are super comfortable with a standard length of pull. The grip of the stock and the entire forend are OverMolded with soft rubber texturing for outstanding shotgun handling characteristics.

SpecOps Stock, Mossberg 500, 590

The finest recoil reducing stock on the Planet!

From the longest arm of the law to the shortest, the Knoxx SpecOps Stock is instantly adjustable to fit any shooter. With over 4 inches of adjustment, this is a stock that the entire department can use comfortably in any application and with any load.

Just when you thought recoil reduction had reached maximum potential, Knoxx Industries has produced yet another patented recoil reducing stock to revolutionize the way you think about shotguns. Utilizing dual Knoxx recoil compensating systems, the SpecOps Stock has the ability to reduce felt recoil of even the most potent loads by up to 95 percent. The SpecOps Stock makes even the heaviest loads easy for all shooters to handle.

The SpecOps polymer and alloy construction makes it durable, reliable and built to last. Also, the unique features and design of this pistol grip style stock allows law enforcement agencies and military personnel the ability to use their shotguns with all load-bearing and ballistic tactical vests.

Designed to fit any and all shooters, and practically devoid of recoil, the Knoxx SpecOps Stock is the latest in the Knoxx family of recoil reducing products. Not only is it utilizing two recoil-absorbing mechanisms to soak up recoil, it also adjusts to fit any shooter regardless of the situation or application. Hunters and competitive shooters will find their scores and hit ratios improving as flinching and recoil anticipation dramatically decreases.

Unique Features Include:

Instantly adjustable to fit all shooters (11.25 to 15.25 inch length of pull)

Perfect fit with load bearing and ballistic tactical vests

Dual recoil compensation systems eliminate harsh recoil with all loads

Unique design cuts muzzle rise, Get back on target faster

Lightweight durable alloy and polymer construction for years of reliable service

Advantages:

Dramatic Reduction in Recoil and Muzzle Flip

Eliminates Shooter Fatigue and Pain Regardless of Size

Use Magnum Shells without Pain

Increased Accuracy and Faster Follow up Shots

Increased Confidence and Effectiveness in Shotgun Utilization

Reduced Officer injury claims

This SpecOps Stock fits Mossberg 500, 590, 835 and 888 12 gauge series.

M4 Style Complete Butt Stock Kit

Commerical style M4 6 position, extendable stock lets you select the length of pull best suited to your shooting needs. Requires no alterations, Includes commercial width buffer tube, receiver lock plate, castle lock nut, rear sling swivel, recoil spring and buffer.

Package Includes:

M4 Style Stock
6 Position Commercial Width Tube
Carbine Buffer Assy
Spring
receiver adapter
castle nut

GG&G Carbine Stock Receiver End Plate - Ambidextrous

The new series of GG&&G Receiver End Plate Sling Adapters can also be used to attach a conventional sling in conjunction with the front sling swivel. A significant advantage of this set up is that expanding or collapsing the buttstock does not affect the sling length. If you wear body armor, a tactical vest or a jacket, you no longer need to re-adjust the sling length due to the extra apparel.

GG&G offers two Receiver End Plate Sling Adapters. Both are designed for professional use being machined from 4140 ordnance steel. They are manganese phosphated black, and can easily be installed by the operator. One of the Receiver End Plate Sling Adapters has a rectangular sling slot that will accept sling webbing up to 1 1/4" wide, such as the Specter Gear Single Point Tactical Sling. The other sling attachment features ambidextrous mounting rings for attaching spring-loaded clips like those found on the Chalker Tactical Sling or the Heckler & Koch combat-carry-type slings. The rectangular end plate adapter is available in ambidetrous, right and left handed versions.

DPMS LR-308T, 308 Winchester with 16 inch Barrel

Click here for information when ordering a firearm.

Everyone loves a DPMS Panther Arms rifle. The DPMS Panther LR-308T features a 16 inch heavy barrel and a ribbed aluminum free float forearm.

DPMS Panther Arms LR-308T specifications:

Manufacturer: DPMS

Model: PANTHER LR-308T

Action: Semi-automatic

Type: AR

Caliber: 308 Win

Barrel Length: 16 inches

Finish/Color: Matte

Grips/Stock: Black

Accessories: 2 Mags, Cleaning kit, Sling

Capacity: 19 Rounds

Description: Free Float Handguard

Barrel:

16 inch Length

4140 Chrome-moly steel Heavy Barrel

6 groove, right-handed 1x10 twist, button rifled

Weight:

Empty - 8.5 lbs

Length:

37.6 inches

DPMS AR-15 Stripped Lower Receiver

DPMS Panther Arms A-15 AR15 Stripped Forged Lower Receiver

This Stripped Lower Receiver is forged from T6 Aircraft Aluminum Alloy and has a hardcoat anodized finish. Does not include any internal or external parts. Receiver uses current standard .250 inch pivot pin and a small pin .154 inch trigger.

Due to Federal firearms regulations, a Form 4473 or transfer to a receiving FFL is required for the purchase of this receiver. If you are unsure of the procedure, please click here for more information.

Glock 17

The Glock 17 in caliber 9x19 is the most widely used law enforcement pistol worldwide. Because of its unsurpassed reliability, above-average magazine capacity of 17 cartridges in the standard magazine and its low weight, it is trusted by law enforcement officers in their daily duties throughout the world. It is safe, easy and quick to use through the revolutionary Safe Action trigger system. GLOCK 17, designed for professionals.

Family: G17 Series
Model: G17
Type: Semi Auto Pistol
Action: Safe Action
Caliber: 9 x 19
Capacity: 17+1
# of Magazines: 2
Mag Description: Two 17rd
Finish: Tenifer
Frame: POLYMER
Grip: Black Polymer
Sights: Fixed
Barrel Length: 4.49 inches
Overall Length: 7.32 inches
Case: Plastic

Click here for information on how to order a firearm and the necessary steps that must be completed.

Glock 21 Slim Frame with Picatinny Rail

Glocks new version of the 45 ACP 21 with the Slim Frame, Ambidextrous Safety and Picatinny Rail.

The Glock 21SF has 3 exterior design changes as compared to the Glock 21.

The first is the ambidextrous magazine release. Glock also redesigned their magazines to address the differences in the original G21 and the G21SF. The new magazines will function in both designs, but the old magazines don't have the necessary cut out in the front of the magazines to funciton in the new weapon. The magazine capacity didn't change: you still get 13 rounds of .45ACP in the mag plus one more in your chamber.

The second design modification is the reduced size of the grip frame. This is something that needs to be felt to appreciate. The dead space behind the magazine well is much smaller on the G21SF than it is on the G21. There is also a noticeable difference in the thickness of the grip frame on either side of the mag well.

The third design modification is the inclusion of a full milspec 1913 Picatinny rail system on the dust cover.

Family: G21 Series
Model: G21 Slim Frame
Type: Semi Auto Pistol
Action: Safe Action
Caliber: 45 ACP
Capacity: 13+1
# of Magazines: 2
Mag Description: Two 13rd
Finish: Tenifer
Frame: POLYMER
Grip: Black Polymer
Sights: Fixed
Barrel Length: 4.6 inches
Overall Length: 7.59 inches
Case: Plastic
Additional Info: Ambidextrous Magazine Release, Glock Rail, Slimmer Frame Size

Click here for information on how to order a firearm and the necessary steps that must be completed.

GG&G Carbine Multi Use Sling Adapter

The new GG&G Mult Use Sling Adapter For AR-15 / M4 collapsible stocks will accept up to 1 1/4 inch webbing for traditional sling attachments, and has a special annular feature that allows those slings with HK style snap hooks to be used without having to change out the receiver end plate sling adapter. This innovative adapter not only allows the use of two different attachment methods, but also allows for the use of single point slings and the attachment of a conventional sling in conjunction with the front sling swivel.

As with all GG&G Receiver End Plate Sling Adapters, this one is designed for professional use being machined at their facility from AS-35 Geneva steel. Of exceptionally high quality, this famous Swiss steel features molecular structure with elongated grains for added toughness. It has a manganese phosphate matte black finish per mil-spec.

ScopeCoat - Trijicon TA-11

The Devtron Scopecoat is constructed of high quality 2mm thick neoprene laminated with nylon. Its simple design safeguards any kind of scope from dings and scratches, dust, dirt and moisture. Neoprene has a 5% moisture absorbency, which takes moisture away from the scope and helps protect it from rust and corrosion. Scopecoat is a proven design that has been field tested and recommended by the North American Hunting Club. Scopecoats are proudly made in America.

Fits the Trijicon TA-11.

ScopeCoat - Trijicon TA-01NSN

ScopeCoat - Trijicon TA-01

ScopeCoat - Eotech 552

ScopeCoat - Eotech 511

ScopeCoat - Aimpoint, Comp, M2, M3

MSAR STG-556 Sporting Rifle - Black Picatinny Rail

Click here for information when ordering a firearm.

STG-556 Innovative Advanced Bullpup Sporting Rifle Design

The STG-556 Sporting Model rifle is a gas operated semi-automatic bull pup rifle featuring a quick interchangeable barrel available in various lengths. The STG-556 innovative design features include a Forward Assist and Last Round Bolt Hold Open Release; something never before seen in a rifle of this distinction.

This state-of-the-art design and platform has been totally re-engineered to bring you absolute function and reliability... Making a 30 year battle proven design bar none above all others. This ambitious firearm is brought to you by Microtech Small Arms Research, a contemporary sister company to Microtech Knives, Inc., acknowledged world leader in specialty cutlery.

TYPE OF FIREARM: Bull Pup Rifle, Semi-Automatic
OPERATION: Gas Operated Rotating Bolt, Short Piston Drive
CALIBER: 5.56mm (.223)
RATE OF FIRE: Semi-Automatic: 150 rounds per minute
BARREL GROUPS: 16" (406.4mm) 4150 Chrome Moly, Chrome Lined
OVERALL LENGTH: 27" (685.8mm)
TRIGGER: Pull Through Trigger System
SIGHTS: Integrated 9" Picatinny Rail
STANDARD STOCK: High Impact Resistant Synthetic Material in Tactical Black
TYPE OF SAFETY: Semi Automatic 2 Position, lateral push through and drop safety
WEIGHT: EMPTY 7.2 lbs. (3.26kg).

Galati Deluxe Tactical Vest, large

Keep your tactical gear within easy reach and your hands free at the same time. These deluxe tactical vests are engineered to efficiently organize all your tactical gear and accessories.

The Galati Deluxe Tactical Vest includes a universal holster, pistol web belt, 3 universal pistol mag/flashlight pouches, radio pouch, sniper shoulder, large ID pouch, 4 adjustable rifle mag pouches, 2 internal zippered map/document pouches, and a heavy duty back loop system to carry additional gear and tools. The vest is fully adjustable in girth and length. High quality zippers.

LARGE VEST:

Chest: up to 64"
Waist: up to 60"
Length: up to 28"

100% Guaranteed with a 2 Year Warranty through Galati International.